Energy monitor in HomeAssistant
1. Introduction
2. Integrate the energy meter of IAMMETER into Home Assistant
Demo show
2.1 Install HA software
2.2 Configuration
2.3 Find your meter in HA
2.4 Sensors
2.5 Edit your lovelace
3. Monitor your solar pv system with Home Assistant
4. Open source project: Integrate the energy meter of IAMMETER into InfluxDB ,Grafana and Home Assistant
Monitor solar pv system by HomeAssistant,InfluxDB and Grafana
Subscribe topic from IAMMETER by Home Assistant
5. Integrate IAMMETER energy meter to third-party platforms other than Home assistant
OpenHab
NodeRED
Upload data to third-party mqtt server
Upload data to third-party TCP/TLS/http server
REST API
Develop your own energy monitoring system with IAMMETE products
6. Video tutorial
7. About IAMMETER products and system
This article is about how to integrate the energy meter of IAMMETER into Home Assistant. But the energy meter of IAMMETER does not only support third-party platforms such as Home Assistant but also has a powerful IAMMETER-cloud and app service, more information please refer to
Application introduction about the IAMMETER system and smart energy meter
Use the 3 phase energy meter the way you like
1. Introduction
HomeAssistant (https://www.home-assistant.io/) is an open source home automation system.
IAMMETER WiFi energy meter can be integrated with HomeAssistant system.
Introduction in Home Assistant https://www.home-assistant.io/integrations/iammeter/
2. Integrate the energy meter of IAMMETER into Home Assistant
Demo show
This is a simple demo of integrating the bi-directional Wi-Fi Energy meter to Home-Assistant system,
URL: http://ha.iammeter.com:18123/ username: iammeter password: iammeter
You can remotely switch ON/OFF the three lights and see how the power changes accordingly.
2.1 Install HA software
Install the latest version of Home Assistant (0.107.0.dev20200310 or later version)
2.2 Configuration
To use the Iammeter sensors in your installation, add the following to your configuration.yaml file:
Tips: You can find your meter and check its host IP address by double clicking its icon in the network of your PC which is connected to the same home Wi-Fi network
2.3 Find your meter in HA
Restart the server management and reconnect to it, then you will see the entity of the meter if the meter is already connected to the Internet.
2.4 Sensors
Sensors available in the library:
Single Phase WiFi Energy Meter (WEM3080)
name
Unit
Description
wem3080_voltage
V
Voltage.
wem3080_current
A
current.
wem3080_power
W
active power.
wem3080_importenergy
kWh
Energy consumption from gird
wem3080_exportgrid
kWh
Energy export to grid
Three Phase WiFi Energy Meter (WEM3080T)
name
Unit
Description
wem3080t_voltage_a
V
A phase voltage
wem3080t_current_a
A
A phase current
wem3080t_power_a
W
A phase active power
wem3080t_importenergy_a
kWh
A phase import energy
wem3080t_exportgrid_a
kWh
A phase export energy
wem3080t_frequency_a
kWh
A phase frequency
wem3080t_pf_a
kWh
A phase power factor
wem3080t_voltage_b
V
B phase voltage
wem3080t_current_b
A
B phase current
wem3080t_power_b
W
B phase active power
wem3080t_importenergy_b
kWh
B phase import energy
wem3080t_exportgrid_b
kWh
B phase export energy
wem3080t_frequency_b
kWh
B phase frequency
wem3080t_pf_b
kWh
B phase power factor
wem3080t_voltage_c
V
C phase voltage
wem3080t_current_c
A
C phase current
wem3080t_power_c
W
C phase active power
wem3080t_importenergy_c
kWh
C phase import energy
wem3080t_exportgrid_c
kWh
C phase export energy
wem3080t_frequency_c
kWh
C phase frequency
wem3080t_pf_c
kWh
C phase power factor
2.5 Edit your lovelace
Here you can add the card manually
Or you can copy and paste the following code
cards:
– cards:
– entity: sensor.meter_voltage
max: 300
min: 100
name: voltage
theme: default
type: gauge
– entity: sensor.meter_power
max: 5000
min: 0
name: power
theme: default
type: gauge
type: horizontal-stack
– entities:
– entity: sensor.meter_voltage
name: voltage
– entity: sensor.meter_power
name: power
– entity: sensor.meter_importenergy
name: importenergy
– entity: sensor.meter_exportgrid
name: exportgrid
type: glance
– entities:
– entity: sensor.meter_power
– entity: sensor.meter_voltage
– entity: sensor.meter_importenergy
hours_to_show: 24
refresh_interval: 0
type: history-graph
type: vertical-stack
Save and then you will see the meter’s data.
3. Monitor your solar pv system with Home Assistant
Please refer to https://community.home-assistant.io/t/monitor-your-solar-pv-system-in-home-assistant-energy-dashboard-vs-energy-management/342710
4. Open source project: Integrate the energy meter of IAMMETER into InfluxDB ,Grafana and Home Assistant
Monitor solar pv system by HomeAssistant,InfluxDB and Grafana
This is an open-source project.Tell you how to monitor your solar PV system by WiFi Energy meter, Home assistant, grafana, and inFluxDB.
monitor your solar pv system by home assistant,IAMMETER,grafana,influxDB
Subscribe topic from IAMMETER by Home Assistant
The Wi-Fi Energy meter of IAMMETER( WEM3080 and WEM3080T) had been an integration of Home Assistant.
IAMMETER Wi-Fi Energy meter in Home Assistant
Besides reading data from the local api of hardware ,you can also subscribe the topic from IAMMETER directly. This document will show how to integrate with Home assistant by subscribing topic from IAMMETER cloud .
Subscribe topic from IAMMETER by Home Assistant
5. Integrate IAMMETER energy meter to third-party platforms other than Home assistant
In addition to IAMMETER-cloud and Home Assistant, you can also configure IAMMETER products to upload data to other open source platforms or customers’ own systems ,like below pic.
OpenHab
OpenHAB (https://www.openhab.org/) is an open source home automation system. IAMMETER Wi-Fi energy meter can be integrated into openHAB system easily, energy meter in Openhab
How to integrate energy meter to Openhab
NodeRED
Nodered is a programming tool for wiring together hardware devices, APIs and online services in new and interesting ways.
How to add IAMMETER energy meter in nodered, step by step
Upload data to third-party mqtt server
The IAMMETER energy meter can also upload energy data to third-party server by MQTT.
Publish the data of energy meter to third-party mqtt server
Upload data to third-party TCP/TLS/http server
In addition to uploading via mqtt, the energy meter can also upload data to a third-party server via http post, tcp and tls.
Upload energy data to third-party server by HTTP, TLS,TCP
REST API
Both single-phase energy meter(WEM3080) and three-phase energy meter(3080T) support local api.
Get the data from energy meter by local API
Develop your own energy monitoring system with IAMMETE products
This is a summary article about how to integrate IAMMETER energy monitor into a third-party system.
How to upload the energy data of the IAMMETER energy meter to a third-party system other than IAMMETER-Cloud.
6. Video tutorial
Video : How to use IAMMETER Energy monitor in Home Assistant
7. About IAMMETER products and system
Application introduction about the IAMMETER system and smart energy meter
Monitor the solar pv system by 3 phase energy meter of IAMMETER
Monitor the energy consumption in IAMMETER
Wi-Fi Energy Meter
Single Phase Wi-Fi Energy Meter
Monitor two-way energy by one meter with bi-directional function
DIN-Rail mounting fits neatly in the meter box
Open API for integration with your own server
CE, RoHs, RCM Complied
Applied in single phase system
Three Phase Wi-Fi Energy Meter
Monitor two-way energy by one meter with bi-directional function
DIN-Rail mounting fits neatly in the meter box
CE, RoHs, RCM Complied
Applied in three phase or single phase (as 3 single phase meters) system，or split-phase system
