KNIFE GATE VALVE THROUGH CONDUIT

Size:  DN50 – DN600 Pressure Rating: PN10 and 150LBSMaterial: DI,WCB,LCB,WC1,WC6,WC9,C5,CF3,CF3M,CF8,CF8M and other Alloy.Design & Manufacture: MSS SP-81Face to Face Dimension: MSS SP-81Ends Dimension:DIN2533 BS4504,JIS B2212,ANSI B16.5,BS10 TABLE D/ETest & Inspection: MSS SP-81Operation: Handwheel,Chainwheel,Bevel Gear;Electrical & Pneumatic Actuator Working temperature: -29℃~+180℃.

Features:

Leflow’s through conduit knife gate valves are designed for two split bodies with double seat and for media with high consistency.The double seat design assures a non-clogging shut off.The gate slides through the full length of the body.When the valve is in open position,there are no dead corners in it and the valve becomes an extension of the pipe.

The disc of Knife gate valve is flat, but the disc edge is knife-type oblique,Like the blade of knife, which can cut off the fluid easily,even if there are some solid particles. Because of its compact wafer structure, it is mainly for low pressure application. The ends can be Wafer, Lug and Flange types.

Knife Gate valve is commonly used in following application:Pulp and Paper Industry, Mining,Power Plants,Food and Beverage, Chemical Plants and Water Treatment plants.

 

KNIFE GATE VALVE THROUGH CONDUIT