M1230 Flush Grid Modular Belt
● Open hinge.
● Stiff 0.5″ Flush Grid design.
● 70% open contact area; largest opening 5×3.3 mm (0.2″x0.13″).
● Contact Path Conveyor for precise belt measurements and stock status before designing equipment or ordering a belt.
Belt data
Belt material
Rod material
Nominal tensile strength straight run N/M (21°C)
Belt weight kg/m²
Standard range of belt widths mm
POM
PP
16000
7.80
50*n
PA
18000
8.10
PP
PP
11000
5.40
PE
PE
7000
5.70
Remark:
Real Conveyor Modular Belts widths are in most cases 0.1% to 0.3% smaller.
For PP material up to 750 mm (30″) -3 mm to 0 mm and -0.4% to 0% for wider belts.
For POM material up to 750 mm (30″) -3 mm to 0 mm and -0.4% to 0% for wider belts.
For PE material up to 750 mm (30″) -3 mm to 0 mm and -0.4% to 0% for wider belts.
The nominal tensile strength is valid for 21 °C. The admissible tensile force depends on the operating temperature near the drive sprockets. Within the temperature range allowed, the admissible tensile force may vary from 100% to 20% of the nominal tensile strength.
