• $50

Matters Needing Attention During the Installation of Solar Garden Lights

Solar garden lights are an independent self-powered system. It is likely to have problems during installation, so you need to pay special attention during the installation process. Then what matters should be paid attention to during the installation of solar garden lights?

 

1. Basic knowledge about the solar garden lights

 

Solar garden lights use solar radiant energy as power source. Solar panels are used to charge the battery during the day, and the battery powers the garden light source at night. There is no need for complicated and expensive pipeline laying. The solar powered yard lights can adjust the layout of the lamps at will, which is safe, energy-saving and pollution-free. The charging and turning on/off process adopts intelligent control, light-controlled automatic switch with no manual operation, stable and reliable work, saving electricity bills, which is maintenance-free.

 

2. Matters needing attention during the installation of solar garden lights

 

When installing solar powered yard lights, the battery should be placed in the control box lightly to avoid damage to the control box; the battery is an electrochemical device and is sensitive to temperature, so pay attention to the temperature range of the battery when installing the battery to avoid direct sunlight. The room and container must be kept clean. The correct wiring of the solar power light battery is very important to the safety and efficiency of the system. The connection between the batteries must use copper gaskets to enhance their conductivity, and then press the bolts on the battery terminals to maintain the correct connection between batteries to prevent short circuit. The output line of the battery needs to be connected to the controller through a PVC pipe. After the connection is completed, close the door of the control box.

 

When installing solar powered yard lights, all components must be kept fixed. First, install the bracket and the arm part. The solar panel needs to be fixed to the bracket, and one end of the arm is fixed to the lamp holder. Then, install the installed bracket and arm to the main light pole one by one. After fixing, check each part one by one to prevent the phenomenon of falling off during the lifting process. Then debug the solar garden light to see if it can operate normally. If the data shows normal, it can be lifted and installed.

 

When installing solar powered yard lights, installers should wear protective clothes and helmets. During the lifting process of the main light pole, pay attention to the direction and speed of the movement of pole body. After the completion, the installer needs to carefully observe whether there is any deviation in the sun angle of the solar panel; or whether the lamp holder is skewed or loose. If there is a problem, it needs to be adjusted in time.

 

The solar powered yard lights are colorful, elegant and unique. They work stably, have high safety performance, and are maintenance-free and pollution-free. Solar garden lights can be seen everywhere in residential areas, parks, and tourist attractions. They not only bring light to people at night, but also create a beautiful and harmonious living environment.