Nylon Rod
Our company nylon products are divided into MC casting nylon and extrusion nylon according to different processes.
Nylon varieties are PA-6, PA66, PA1010 and so on. MV nylon molecular weight up to 3.5-7.0 ten thousand, using different process equipment and mold, can process the corresponding requirements of the products.
Specification of Nylon Rod
Species
Rod(mm)
Tube(mm)
Plate (mm)
Diameter
Length
Outer diameter
Wall thickness
Length
Wide
Thick
Mc Nylon
30-500
300-500
40-500
≥10
≦4000
1000
≥ 5
Extruded nylon
6-250
1000
Nylon hose
6-14
The Technical Indexes of Nylon Rod
Name
unit
MC nylon
PA1010
Density
g/cm³
1.12-1.14
1.05
Tensile strength
Mpa
≥80
50
Elongation
%
100-300
100-250
Brinell hardness
Kg/mm²
21
17.2
The rate of water absorption
%
0.9
The coefficient of friction
0.23
The dielectric constant
3.3
3.6
Features of Nylon Rod
Nylon rod is an important engineering plastic, which can replace the wear-resistant parts of mechanical equipment, and replace copper and alloy as the wear-resistant parts of equipment. It has good toughness, strong wear resistance, oil resistance, seismic resistance, good tensile and bending strength, and has the characteristics of small water absorption and good dimensional stability, so it is used to process a variety of wear-resistant high-strength parts.
Usage of Nylon Rod
Nylon can be used for large gera, worm gera, shaft sleeve, a large sealing surface, a guide ring, a guide rail, a slider of hydraulic gate, rolling bearing retainer, etc.
https://www.xinrui-plastic.com/products/nylon-rod.html
