Serum Clot Activator Tube
Golden VacTM serum clot activator tube is to obtain serum specimen used for serum determinations in chemistry, serology, and immunohematology.
Description of Serum Clot Activator Tube
01
Silica particles act as the clot activator.
02
Blood clotting promoted with ultrasonically spray-dried.
03
Silica particles on the interior tube wall.
04
Gently mix the blood collection tube by inverting 5-6 times immediately to activate clotting after blood drawing.
05
To obtain serum, tube should be allowed to stand for 30 minutes or until the clot is formed.
06
Centrifugation: ≤ 1300 g (RCF) for 10 minutes at 18-25° C.
Specification of Serum Clot Activator Tube
Cat. No
Volume/ml
Size/mm
Additive
Separator
Material
Cap Color
Closure
2.0
13X75
Clot Activator
/
PET/GLASS
plain vacuum vacutainer tube vial
Safety Cap+Rubber
3.0
13X75
Clot Activator
/
PET/GLASS
Safety Cap+Rubber
4.0
13X75
Clot Activator
/
PET/GLASS
Safety Cap+Rubber
5.0
13X75
Clot Activator
/
PET/GLASS
Safety Cap+Rubber
6.0
13X100
Clot Activator
/
PET/GLASS
Safety Cap+Rubber
7.0
13X100
Clot Activator
/
PET/GLASS
Safety Cap+Rubber
9.0
16X100
Clot Activator
/
PET/GLASS
Safety Cap+Rubber
10.0
16X100
Clot Activator
/
PET/GLASS
Safety Cap+Rubber
9.0
16X100
Clot Activator
/
PET/GLASS
Rubber Stopper
10.0
16X100
Clot Activator
/
PET/GLASS
Rubber Stopper
Available in a range of 1-10ml blood collection tubes.
All tubes are supplied in 1000pcs or 1200 pcs/ctn.
To know more about Serum Clot Activator Tubes, click ” What is Clot Activator Tube(Red Top Tube)”.
What is clot activator made of?
SiO2 is a key component of the clot activators used in blood collection, it typically takes the form of glass or silica particles. Blood entering the tube and contacting the particles on the tube wall causes the initial activation to happen. It is vital to fully mix the blood and particles by inverting the tube five times in order to continue the activation process.
