• $60

Aluminum Oxide Flap Wheel M10 (AO)

Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut-rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications.

Aluminum Oxide Flap Wheel M10 (AO) Grit Size Table Corresponding To Raw Materials





Aluminum Oxide Flap Wheel M10 (AO) Specification:

Max. RPM: 6120~76300 RPM


Other Raw Materials: Silicon Carbide(SC), Zirconia(ZR), Ceramic Aluminum Oxide Combined (CAO)


Grit Size(Aluminum Oxide): 40#/60#/80#/100#/120#/150#/180#/240#/320#/400#/600#


Aluminum Oxide Flap Wheel M10 (AO) Materials that can be worked:



Other non-ferrous metals


Hard non-ferrous metal




Soft non-ferrous metal




Stainless steel (INOX)


Grey/nodular cast iron (GG/GJL, GGG/GJS)


Annealed cast iron




Fiber-reinforced duroplastics (GRP, CRP)


Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)


Steel, cast steel




Flap Wheels with Shank

Flap wheels with Shank is suitable for grinding small area, dead angle, inner hole surface and slit gaps that difficult to reach. The Features of the abrasive clothes are various with multipurpose application capacity. It is flexible and rich in tensile strength. It could remove the burr and uneven, rough surface with fast grinding force efficiently, meanwhile, can make sure the performance result achieve a slightly finer surface. It is a good product for pre-painting or mirror finishing preparation procedure.



High flexibility to optimium adapation to countours


Steadly high stock removal through the entire tool life and aggressive coated abrasive resin is freed up constantly


The design of opening spaces and flat bonded make the abrasive tools can process a face-down position, so they can touch closely to the edges and corners.


Aluminum Oxide Flap Wheel M10 (AO) Applications:





Work on edges




Weld dressing


Fine grinding in multiple steps


Aluminum Oxide Flap Wheel M10 (AO) Applicable Industries

Applicable Industries

■ Chemical processing industries


■ Building


■ Steelworks


■ Tool and mold processing


■ Pipeline


■ Shipping Building


■ Automotive industry


■ Aerospace, gas turbine treatment and repair


■ Machine engineering


Aluminum Oxide Flap Wheel M10 (AO) Applicable Industries

Application Purpose

■ Leveling


■ Deburring and Welding grinding


■ Structuring Surfaces


■ Step-by-step fine grinding


Aluminum Oxide Flap Wheel M10 (AO) Applicable Industries

Safety Warning of Aluminum Oxide Flap Wheel M10 (AO)


Safety Warning of Aluminum Oxide Flap Wheel M10 (AO)


Please try to choose operation indoors environment and wear protective guards and goggles.


Never to exceed the recommanded maximum permitted rotational speed for safety reasons.


In order to have a gppd syocl removal rate, quality of surface and thermal laoding on the workpiece, the best performace would with a recomended cutting speed at 15-20m/s.


Don’t push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to diffirent grit flap wheels.


Safety Warning:

The clamping lenght between shank and grinders should be more than 15mm.


Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.