• $100

Cross Tapered Roller Bearing


Mounting of THB Crossed Roller Bearings


When assembling the cross-roller bearing, follow the steps below.

1. Inspecting the parts before assembling them, Thoroughly clean the housing and other parts to be assembled, and check if there is no burr or knots.


2.Installing the cross-roller bearing into the housing onto the shaft.

Since the cross-roller bearing is a thin bearing, it tends to tilt as it is installed. To prevent it, gradually drive the cross-roller bearing into the housing or onto the shaft by gently hitting it with a plastic hammer while keeping it horizontal. Be sure to keep hammering it with much care until you hear it fully contact the reference surface.