Explosion Proof Connector Elbows SE Series


Class I Division 1,Group A,B,C,D


Zone 1, Zone 2


Class II Division 1,Group E,F,G


Zone 21, Zone 22


Class III


Type 4X,IP66


Ex d IIC Gb


Max. M115x1.5 or NPT4″


Ex tb IIIC Db IP66


For narrow space, conduit corner where no enough space to reach to operate and conduit layout turning where direction change requests, SE series explosion proof connector can be used as explosion proof elbow to change the conduit direction to fit in explosion proof lighting, explosion proof enclosure, explosion proof panel and explosion proof junction box., this flame proof connector also could be used as 3 4 emt pull elbow and hazardous area plug where flammable gas and dust produce to meet class 1 division 1 conduit requirements and class 1 division 2 conduit requirements.



Explosion Proof Connector SE Series



90°type structure to change the conduit direction


Explosion Proof Electrical Connectors


45°type structure to bend the conduit conveniently


Explosion Proof Cable Connectors


M male thread/ M male thread, M male thread/ F female thread, F female thread/ F female thread


Selection Table

Explosion Proof Connector SE Series


Data Sheet

Explosion Proof Connector SE Series


IEC StandardIEC60079-0, IEC60079-1, IEC60079-7, IEC60079-31Ex d IIC GbEx tb IIIC Db IP66Zone 1, Zone 2Zone 21, Zone 22

EU StandardEN60079-0, EN60079-1, EN60079-7, EN60079-31II 2 G Ex d IIC GbII 2 D Ex tb IIIC Db IP66Zone 1, Zone 2Zone 21, Zone 22

NEC & CEC StandardClass I, Div.1, Group A, B, C, DClass II, Div.1, Group E, F, GClass III

UL StandardUL844, UL1598, UL1598A

CSA StandardCSA C22.2 No.137


Nickel Plated Brass / 304 Stainless Steel / 316 Stainless Steel

IP Grade

Wet Locations, Type 4X, IP66

Ambient Temperature

-40℃~ +100℃ / -40°F ~ +212°F