Explosion Proof Connector Class 1 Div 2 Liquid Tight Connectors SL Series

Advantages

Class I Division 2,Group A,B,C,D

Zone 1, Zone 2

Class II Division 1,Group E,F,G

Zone 21, Zone 22

Class III

Type 4X，IP66

Ex d II Gb

Max. NPT4″

Ex tb IIIC Db IP66

SL series explosion proof liquid-tight connector is designed to connect the liquid-tight flexible metal conduit to explosion proof lighting, explosion proof junction box, explosion proof panel and explosion proof enclosure in wet, dusty, corrosive and explosive environment. Depends on the installation areas, this explosion proof connector can be requested with straight type, 90°angle  type and 45°angle  type as class 1 div 2 liquid tight connectors to meet class 1 division 2 conduit requirements.

Features

Explosion Proof Connector SL Series

01

Cable conductor protection through the rubber ring

Flame Proof Connectors

02

Quick connection to liquid tight conduit

Intrinsically Safe Connectors

03

Male flame proof thread for convenient connection to enclosure

Selection Table

Explosion Proof Connectors SL Series

Data Sheet

Explosion Proof Connector SL Series

Compliaces

IEC StandardIEC60079-0, IEC60079-7, IEC60079-31Ex e II GbEx tb IIIC Db IP66Zone 1, Zone 2Zone 21, Zone 22

EU StandardEN60079-0, EN60079-7, EN60079-31II 2 G Ex e II GbII 2 D Ex tb IIIC Db IP66Zone 1, Zone 2Zone 21, Zone 22

NEC & CEC StandardClass I, Div.2, Group A, B, C, DClass II, Div.1, Group E, F, GClass III

UL StandardUL844, UL1598, UL1598A

CSA StandardCSA C22.2 No.137

Material

Malleable Iron / Zinc Die Cast

IP Grade

Wet Locations, Type 4X, IP66

Ambient Temperature

-5℃~ +100℃ / -40°F ~ +212°F