PCB Enclosure Assembly

HX Technology also offered PCB Finish Product Assembly, including assembly with the outer shell and with a wire connector.


With two assembly lines and a specialized warehouse for raw material provided by customers, we’ll ensure your product meets the highest quality standards for assembly. With consideration of design direction for PCBA and knowing the finish product structure first, we would set standards for every kind of product we assemble; only with strict criterion and control system to make sure the quality and deliver on time!


PCB Enclosure Design Guidelines

·Ensure MCAD and ECAD tools use the same data format.

·Select the right component package for the PCB enclosure.

·Ensure that the PCB enclosure box fits the board size.

·Ensure board cutouts are accurately aligned with component placement.

·Understand the environmental hazards of the installation.

·Consider the impact on signal transmission.

·Select PCB enclosure materials that meet thermal requirements.

·Consider equipment tolerances.


What is a PCB Enclosure

PCB enclosure is equipment to store and protect printed circuit boards, which can offer a PCB cover. In order to protect the PCB from environmental factors, adding possible consideration of electromagnetic compatibility (EMC), it is almost certain that the PCB will be placed in some form of enclosure. Inevitably, the PCB enclosure will interfere with the free flow of air around the PCB and therefore also have an impact on the thermal performance of the system


What is a PCB Enclosure

Safety Distance Between PCB and PCB Enclosure

The production and processing of PCBA for the board and the PCB enclosure will generally have safety distance requirements. This distance can ensure that our PCBA board will not be damaged in some harsh environment.


The safety distance between the PCBA board and mounting PCB in the enclosure includes electrical clearance (space distance), creepage distance (distance along the surface), and insulation penetration distance.


I. PCBA board and the PCB enclosure of the electrical clearance requirements: electrical clearance refers to the two adjacent conductors or a conductor and the adjacent motor shell surface along the shortest distance measured by air. According to the measured working voltage and insulation level, the distance can be decided.


II. PCBA board and PCB enclosure creepage distance requirements: creepage distance refers to the two adjacent conductors or a conductor and the adjacent motor shell surface along the shortest distance measured by the absolute insulation surface.


III. PCBA board and PCB enclosure insulation penetration distance requirements: it should be in accordance with the working voltage and insulation application occasions in line with the following provisions.


1. For working voltage not exceeding 50V (71V AC peak or DC value), there is no thickness requirement.


2. The minimum thickness of additional insulation should be 0.4mm.


3. When the reinforced insulation is not subject to any mechanical stress at the normal temperature that may lead to deformation or performance degradation of the insulation material, the minimum thickness of the reinforced insulation should be 0.4mm.


HX will custom PCB enclosure with a safety distance for your use!