How to Remove the Fault of Sandwich Panel Equipment in the Shortest Time

Zhejiang Jinggong Science & Technology Co., Ltd can teach you how to eliminate the trouble of sandwich panel making machine within 1 minute: today, we will carry out troubleshooting for the foaming machine parts in the complete set of sandwich panel equipment.


1. When you find that there is a fault in a specific part of the polyurethane foaming machine of sandwich panel equipment, the monitoring point will send out an alarm signal, and the flashing mark on the display screen will immediately demonstrate the fault. Then the program will automatically take corresponding protection according to the fault location, such as shutdown, partial shutdown, and injection stops. At the same time, an alarm will be sent out, so the operator should repair it according to the fault.


2. If it is confirmed that the fault has been eliminated, the previously displayed fault text will disappear after pressing the button, and the faults that have not been eliminated will continue to be displayed until some faults are eliminated.


Please rest assured that if you purchase China sandwich panel production line from Zhejiang Jinggong Science & Technology Co., Ltd. Please remember that when the device sends out the fault alarm signal, the fault must not be cleared easily. To press and hold the button, at the same time, the first thing is to find out the cause of the fault display, and according to the information displayed, analyze the cause, and finally solve the problem of using a polyurethane foaming machine. If it still can not be solved, please contact us, we will provide you with a detailed solution.