• $300

Solenoid Control Valve

Basic Information of Solenoid Control Valve


This valve is used as an opening and closing device for piping. The electromagnetic pilot valve controls the main valve, which can be controlled remotely and locally.


Features of Solenoid Control Valve

1. Small in size can replace gate and butterfly valves large electric operating system.

2. The closing speed is adjustable and stable.

3. Save energy

4. Full port, small fluid resistance


Principle of Solenoid Control Valve

When supplying water from the inlet, water flows through the needle valve and enters the main valve control room. When solenoid pilot valve opens, the water in the control room flows out through the solenoid pilot valve and ball valve. If the ball valve opening is greater than the needle valve opening, the main valve controls the indoor pressure is very low, the main valve is in the state of full opening. The pressure in the control room increases and the main valve begins to close when the solenoid pilot valve closes, the main valve control room stops draining.


Installation and Commissioning of Solenoid Control Valve

A filter should be installed before the solenoid pilot valve and should be convenient to pollution discharge. The solenoid valve can choose alternating current 220V or direct current 24V. Normally open or normally closed type can be chosen according to various occasions.  For specific use, please consult ZECO Valve Group


Product scope,  Standards & Materials of Solenoid Control Valve

Size Range: 2″~24″

Pressure Rating: 10bar ~ 25bar

Face to Face Dimensions:AMSE B16.10,EN558-1

Flange End Dimension:AMSE B16.1/16.42,AS4087,EN1092-2Coating: Fusion Bonded Epoxy Coating

Inspection and Test: ISO 5208/EN 12226-2






Ductile lron

EN1563/DIN 1693


Ductile lron

EN1563/DIN 1693


Stainless Steel 431



Stainless Steel 431




ISO 4633

Pilot valve


EN12167IASTM B135

For the materials options not listed,consult factory.zEcO manufactures valves in more than 50 different alloys.